AdapterId 05130h AdapterName "SoundPiper 16/32(tm) Adapter" NumBytes 2 NamedItem Prompt "I/O Port" choice "Port 240" pos[0]=XXXX110Xb io 0240h-024Fh choice "Port 220" pos[0]=XXXX100Xb io 0220h-022Fh choice "Disabled" pos[0]=00000000b pos[1]=00000000b Help "The SoundPiper may occupy one of four different I/O port ranges. Use the F5=Previous and the F6=Next keys to change I/O port assignments if you are in the 'Change configuration' window. Conflicting assignments are marked with an asterisk and must be changed to use the adapter." NamedItem Prompt "Interrupt Level" choice "Level 5" pos[1]=101XXXXXb int 5 choice "Level 7" pos[1]=110XXXXXb int 7 choice "Level 10" pos[1]=111XXXXXb int 10 choice "Level 9" pos[1]=100XXXXXb int 9 choice "Disabled" pos[1]=0XXXXXXXb Help "The SoundPiper may occupy one of four different Interrupt levels. Use the F5=Previous and the F6=Next keys to change Interrupt level assignments if you are in the 'Change configuration' window. Conflicting assignments are marked with an asterisk and must be changed to use the adapter." NamedItem Prompt "DMA Arbitration Level" choice "Level 1" pos[0]=0001XXXXb pos[1]=XXXXX1XXb arb 1 choice "Level 0" pos[0]=0000XXXXb pos[1]=XXXXX1XXb arb 0 choice "Level 3" pos[0]=0011XXXXb pos[1]=XXXXX1XXb arb 3 choice "Disabled" pos[1]=XXXXX0XXb Help "The SoundPiper may occupy one of three different DMA Arbitration levels. Use the F5=Previous and the F6=Next keys to change Arbitration level assignments if you are in the 'Change configuration' window. Conflicting assignments are marked with an asterisk and must be changed to use the adapter." NamedItem Prompt "Joystick Enable" choice "Enabled - Port 200-201" pos[1]=XXXXXXX1b io 0200h-0201h choice "Disabled " pos[1]=XXXXXXX0b Help "The SoundPiper has an joystick interface available. Use the F5=Previous and the F6=Next keys to enable or disable the joystick functions if you are in the 'Change configuration' window. Conflicting assignments are marked with an asterisk and must be changed to use the adapter."NamedItem Prompt "Joystick Wait States" choice "2 Wait States" pos[1]=XXX10XXXb choice "3 Wait States" pos[1]=XXX11XXXb choice "1 Wait State " pos[1]=XXX01XXXb choice "0 Wait States" pos[1]=XXX00XXXb Help "The SoundPiper has a Wait-State generator for joystick accesses. The number of wait-states may be adjusted to permit some software that use the joystick to work better on the PS/2. Use the F5=Previous and the F6=Next keys to enable or disable the joystick wait-state functions if you are in the 'Change configuration' window." NamedItem Prompt "ADLIB/OPL-3 Port Enable" choice "Enabled - Port 388-38B" pos[0]=XXXXXX0Xb io 0388h-038Bh choice "Disabled " pos[0]=XXXXXX1Xb Help "The SoundPiper has an ADLIB/OPL-3 compatible interface available. This interface is typically used as the MIDI Synthesizer. Disabling this port may cause your MIDI playback under Windows to stop functioning. Use the F5=Previous and the F6=Next keys to enable or disable the ADLIB/OPL-3 functions if you are in the 'Change configuration' window. Conflicting assignments are marked with an asterisk and must be changed to use the adapter." NamedItem Prompt "MPU401 Port Enable" choice "Enabled - Port 330-33F" pos[1]=XXXXXX1Xb io 0330h-033Fh choice "Disabled " pos[1]=XXXXXX0Xb Help "The SoundPiper has an MPU-401 compatible interface available. This interface is typically used to communicate with an External MIDI device or the Internal Wave Table daughter card on a SoundPiper 32. Use the F5=Previous and the F6=Next keys to enable or disable the MPU-401 functions if you are in the 'Change configuration' window. Conflicting assignments are marked with an asterisk and must be changed to use the adapter."